[Home ] [Archive]   [ فارسی ]  
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 11, Issue 39 (1-2018) ::
jwmseir 2018, 11(39): 29-37 Back to browse issues page
The Introduction of Oblique Cylindrical Overflow as an Effective Approach to Increase the Discharge Coefficient
Saeed Farzin , Hojat Karami , Shahab Nayyer , Elham Zamiri
Assistant professor
Abstract:   (1058 Views)

Cylindrical weir is one of the hydraulic structures that due to measurement flow rate and flood control are used, and is less expensive than similar structures. In this study, the numerical model validation is performed with an accredited experimental model in three different diameters (11, 9 and 6.35 cm), and in three different angles (45, 90 and 135 degree) toward the wall with Flow3d software. According to the simulation, in the results  with k-ε turbulence model there is a good adaptations than the other turbulence models such as  the RNG and LES model, and the correlation coefficient (R2=0.965), indicated that the k-ε turbulence model is the best. Due to increasing the length of weir in oblique position and changing the situation of spillway from direct position to oblique position, discharge coefficient will increase, so leads to increasing of discharge. The results show that in models with complementary angles, because of the similarity of these models in the flow pattern, the discharge coefficients will be almost equal to each other. With increasing the diameters of spillway from 6.35 cm to 11 cm discharge coefficient reduced up to 50%. Maximum of the correlation coefficient between discharge and discharge coefficient for cylinder with 11 cm diameter is equal to 0.95 that show high Effectiveness of discharge on discharge coefficient.

Keywords: cylindrical spillway, oblique weir, numerical model, Discharge coefficient, spillway’s diameter, Flow3D.
Full-Text [PDF 954 kb]   (170 Downloads)    
Type of Study: Research | Subject: Special
Received: 2016/07/9 | Accepted: 2016/11/21 | Published: 2018/01/7
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA code


XML   Persian Abstract   Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

farzin S, karami H, nayyer S, zamiri E. The Introduction of Oblique Cylindrical Overflow as an Effective Approach to Increase the Discharge Coefficient. jwmseir. 2018; 11 (39) :29-37
URL: http://jwmsei.ir/article-1-644-en.html


Volume 11, Issue 39 (1-2018) Back to browse issues page
مجله علوم ومهندسی آبخیزداری ایران Iranian Journal of Watershed Management Science and Engineering
Persian site map - English site map - Created in 0.05 seconds with 30 queries by YEKTAWEB 3742